We accept various requests of exterior modification by painting and leather replacement, and functional modification pursued ease of use. If you have any special modifications in your maind, please contact us.


Example of Modification

Various Models	Exterior Modification	Painting & Leather Replacement
Leica M6TTL, M6	Viewfinder Modification	Diminish clearly the flare of the rangefinder patch that occurs in some situations when strong light sources are shining obliquely into the finder.
Leica M cameras	Viewfinder Modification	For example, eliminating the 135mm frameline of M6 which shows up with the 35mm frameline.
Leica R8	Finder Modification	Take a slightly blue tone of the viewfinder.
Leica R Lens	Cam Modification	1 Cam >>> 2 Cam 1 Cam >>> 3 Cam 2 Cam >>> 3 Cam R Only >>> 3 Cam
Leica CL	Modification for Mounting Wide Angle Lenses	Make it available for Super Angulon and other wide angle lenses.
Nikon non-Ai Lens	Ai Conversion	We cut a part of the aperture diaphragm ring, and paint it by baking finish. Modification cost is 10,000 JPY (tax is not included). *It is not possible to put it back after conversion since a part of the lens ring will be cut. *You cannot see F numbers from the viewfinder. *we cannot guarantee mounting the converted lens in all of the products manufactured after 1999.
Olympus Pen F/FT/FV	Viewfinder Modification	Replacing the screen with a micro prism split image screen makes it easier to focus. Also, the viewfinder becomes brighter by about 1F (one f-stop) at the same time.

*Caution
Manufacturer may not service a modified equipment. Even, it may not be covered under manufactuere's warranty. Therefore, we basically refuse modifications for equipments which we cannot service after modification. Please note there is a possibility that some modifications may give you usage restrictions. We assume no responsibility whatsoever for any damages resulting from the modification we done at your request.

Advanced technique is required for restoration of camera paint to recover from deterioration and damage. We provide high-quality painting with our original technique throughout the whole process from disassembling to baking finish, so that the best approximation to the original colors and the best restorations are available.
Please order painting with overhaul.

Camera exterior parts after disassembly and unplating. Paint finish remarkably depends on these works. (picture right)

Take out the exposure meter from CL, and file some part of the frame inside of the camera. Then, you can mount wide angle lenses such as Super Angulon and Elmarit M28mm f2.8 (1st) and others to the CL.